INTERSTATE HEAVY EQUIPMENT - ANCHORAGE

Because of its versatility and ease of operation, the mini excavator is a desirable addition to any construction equipment fleet and one of our most often rented pieces of equipment. Therefore, we've included some general information regarding mini excavators and tips for operating mini excavators.

What is the definition of a micro excavator?

A micro excavator is a smaller version of a standard excavator. It comes in both tracked and wheeled versions and can carry up to 20,000 pounds. Any excavator that weighs more than that is called a conventional excavator. However, others argue that the cutoff point should be lower-around 10,000 pounds. The bucket size of a micro excavator ranges from 12 to 24 inches. Read our thorough guide on the seven varieties of excavators to discover more about the differences between mini and other types of excavators.

The Advantages of Renting or Purchasing a Micro Excavator Over a Conventional Excavator

1. Less ground damage-Because mini excavators are lighter and smaller, they do minor damage to the top layer of the ground. They're easier to maneuver around crowded job sites because they're compact (like indoor areas or parking lots).

2. More maneuverable-Their smaller diameters make them easier to use, and their 360-degree rotation makes them perfect for working in tight locations.

3. Easier to transport-Unlike larger excavators, a tiny excavator can be loaded and unloaded rapidly into a trailer or even a truck. Of course, you'll want to double-check that the trailer can handle the load beforehand.

4. Has a longer shelf life - Because it lifts less weight and carries smaller loads, a tiny excavator has a longer shelf life. On the other hand, a standard excavator is far more stress and strain over time. Read How to Extend the Life of Your Machinery for more information.

5. Greater adaptability - Mini excavators may be utilized for a wide range of tasks due to their ability to work with various attachments. Operating enables them to perform multiple jobs other than excavating and destruction. Repairing sewer systems, snow clearing, and building hot tubs and swimming pools are just a few.

A Step-by-Step Tips for Operating Mini Excavators

You can find extensive instructions in the video above, but here are some highlights.

Step 1: When climbing into the excavator, make careful to lift yourself and use three contact points. Keep in mind that falls are the leading cause of fatalities in the construction industry.

Second: Securely fasten your seatbelt.

Next: Shut the door behind you.

Then: Turn the key in the ignition to start the machine.

Lastly: Examine the machine's display to check if any warning lights or other indicators are illuminated. Make sure the fuel tank is full.

Step 6: Remove the safety lock.

Step 7: Raise and lower the boom using the joystick on the right. Pulling the joystick back to raise the crack and pushing it forward to reduce it is how you accomplish it.

Step 8: To "open" and "shut" the bucket, use the same joystick. To open the bucket, press the joystick to the right. Then close the bucket by pressing the joystick to the left.

Step 9: Move the excavator's stick with the joystick to the left. The joystick goes forward when pushed forward and backward when pushed backward.

Step 10: Use the left joystick to swing the cab to the right and left.

Step 11: To drive the excavator, make sure the blade is up and push the machine forward with the pedals on the floor. Lower the blade to stabilize the device once you've repositioned it.